1 1/8 Inch headset bearings

Great for riders who do not require the whole headset.

Street Peg Front – Black

Our Street Pegs now come individually for even greater flexibility on your set ups.
Run single side pegs, double side pegs, two front pegs or two back pegs.
Mix it up to the way you ride with only what you need.
(This peg will need either Street Peg Axle- Single Side or Street Peg Axle - Double Side, depending on your set up)

Get those barspins feeling smooth again!

Fasen's integrated headset is made out of 6061 Aluminium.

It keeps a clean crisp look with the laser etched Logo on the dust cap.

It comes together with two 41.8mm fully sealed bearings.

Colour - Black 

Get those barspins feeling smooth again!

Fasen's integrated headset is made out of 6061 Aluminium.

It keeps a clean crisp look with the laser etched Logo on the dust cap.

It comes together with two 41.8mm fully sealed bearings.

Colour - Oil Slick

Aluminium Pegs made out of the standard 6061 Aluminium that we use on most of our aftermarket parts.
They come in 6 anodized colors and weigh just 100 grams. These are some of the lightest Pegs on the market.
Perfect for Grinding Street or Park. Each Peg pack comes with Front and Rear Axles to fit your scooter.

Reaper Version Two

7 series Aluminium,-600mm/23.6" High by 580mm/22.8" wide,

Standard size inner and an Oversize external diameter (34.9mm) so you will need to use an oversize clamp.

Some of the lightest bars on the market weighing in at 900g, Perfect for experienced riders wanting a light-weight setup,  around 30% lighter than standard Chromoly bars.

Please Note: Aluminium bars are designed for smooth and proficient riders with some experience. 

All Aluminium Bars are covered by a 30 day manufacture warranty covering manufacture defects. It does not cover bends or cracking in the aluminium tubing caused by riding Landing heavy or incorrectly, throwing bars, or direct impacts can cause damage to the bars. For full warranty details please  click here..

Aluminium | Width 580mm| Length 600mm
Outer diameter 34.9mm | Standard inner 28.5mm diameter
This bar requires an oversized clamp and has a slit for IHC setups.

Street Peg Back – Black

Our Street Pegs now come individually for even greater flexibility on your set ups.
Run single side pegs, double side pegs, two front pegs or two back pegs.
Mix it up to the way you ride with only what you need.
(This peg will need either Street Peg Axle- Single Side or Street Peg Axle - Double Side, depending on your set up)

Street Peg Back – Oil Slick

Our Street Pegs now come individually for even greater flexibility on your set ups.
Run single side pegs, double side pegs, two front pegs or two back pegs.
Mix it up to the way you ride with only what you need.
(This peg will need either Street Peg Axle- Single Side or Street Peg Axle - Double Side, depending on your set up)

Street Peg Front – Oil Slick

Our Street Pegs now come individually for even greater flexibility on your set ups.
Run single side pegs, double side pegs, two front pegs or two back pegs.
Mix it up to the way you ride with only what you need.
(This peg will need either Street Peg Axle- Single Side or Street Peg Axle - Double Side, depending on your set up)

Nitro Circus Airbox Set (2 ramps plus connecting platform)

"We are a crew full of action sports enthusiasts in search of the biggest, baddest, and craziest stunts......."

The Nitro Circus airbox set suitable for skateboarders, skaters, BMXers, bikes, scooters & even remote control cars (RC's). The fun can keep going with as you can create a complete Nitro Circus Skate & Stunt Park of your own by adding other Nitro Circus ramp products!

Specs:

• The Nitro Circus large Air Box Ramp Set is manufactured from high impact polyethylene.
• Resistant to variations in temperature, both hot & cold & can be left outside without the fear of damage.
• Designed to withstand impacts with a maximum weight load of 100 kgs including equipment.
• The Nitro Circus Large Airbox Launch Ramp Set includes two large launch ramps & a connecting platform.
• The total length of the complete set when assembled measures 2.4 metres (2 ramps & connecting platform).
• Each individual launch ramp measures 99 cm (L) x 65 cm (W) x 33 cm (H).
• Two-minute click together tool free assembly.